Hook up oil rig

hook up oil rig

How is an oil rig set up?

Once the equipment is at the site, the crew sets the rig up. Here are the major systems of a land oil rig: large diesel engines - burn diesel-fuel oil to provide the main source of power. electrical generators - powered by the diesel engines to provide electrical power.

Why are there oil rigs in the middle of the ocean?

There aren’t any rigs in the “middle” of the ocean, but it is fairly common to find major oilfields over 150 km off the coast. This happens because: Shallow seas often had the correct conditions for oil formation millions of years ago.

Should I work on an offshore rig?

If you cannot handle being away from home seven to 28 days at a time, or if you have family members that depend on your presence in the home on a daily basis, then work on an offshore rig is not for you. That said, you could always work on a land-based rig, or as part of a seismic exploration team.

What are the systems of a land oil rig?

Once the equipment is at the site, the crew sets the rig up. Here are the major systems of a land oil rig: Casing - large-diameter concrete pipe that lines the drill hole, prevents the hole from collapsing, and allows drilling mud to circulate

What are the systems of a land oil rig?

Once the equipment is at the site, the crew sets the rig up. Here are the major systems of a land oil rig: Casing - large-diameter concrete pipe that lines the drill hole, prevents the hole from collapsing, and allows drilling mud to circulate

How does oil drilling work?

How Oil Drilling Works. The cellar provides a work space around the hole for the workers and drilling accessories. The crew then begins drilling the main hole, often with a small drill truck rather than the main rig. The first part of the hole is larger and shallower than the main portion, and is lined with a large-diameter conductor pipe.

How are drilling rigs digged?

Once the land has been prepared, the crew digs several holes to make way for the rig and the main hole. A rectangular pit called a cellar is dug around the location of the actual drilling hole. The cellar provides a work space around the hole for the workers and drilling accessories.

How are oil rigs built to not flip over?

A thin steel coil, called a strake, is fitted to the base to prevent undersea currents from rocking the rig. Iron ore is then pumped into the bottom of the base to create a low centre of gravity, meaning it is impossible to flip. Now the real work begins.

What are the components of oil drilling rigs?

List of components of oil drilling rigs. 1 Mud tank. 2 Shale shakers. 3 Suction line (mud pump) 4 Mud pump. 5 Motor or power source. 6 hose. 7 Draw-works. 8 Standpipe. 9 Kelly hose. 10 Goose-neck.

How is an oil rig set up?

Once the equipment is at the site, the crew sets the rig up. Here are the major systems of a land oil rig: large diesel engines - burn diesel-fuel oil to provide the main source of power. electrical generators - powered by the diesel engines to provide electrical power.

What are the components of a typical land rig?

Components of a typical land rig. Power is provided to the rig by diesel engines, diesel-electric engines, or in some cases, butane engines. Power is transferred from the engines to the different rig systems by belts, chains, and drive shafts on a mechanical rig, or by generated DC electrical power on an electric rig.

What are offshore drilling rigs?

Offshore drilling rigs have similar elements, but are configured with a number of different drilling systems to suit drilling in the marine environment. The equipment associated with a rig is to some extent dependent on the type of rig but typically includes at least some of the items listed below.

Related posts: