How do you hook up a vacuum to an above ground pool

how do you hook up a vacuum to an above ground pool

How to vacuum an above ground swimming pool?

Put the vac plate into the skimmer and leave the basket in place. Remove the skimmer cover and attach the hose directly to the vac plate. If the skimmer comes with elbow fitting, you can use it to secure the hose. Those are the steps that you can follow when you are about to vacuum your above ground swimming pool.

How do you connect a pool hose to a vacuum?

Its super obvious where you need to join the hose because one side of the hose should have a swivel head and the other side attaches to the vacuum head. Once everything is connected, youll be able to lower the vacuum head to the bottom of the pool with the hose. You must keep the other side of the hose in your hand.

How to use a vacuum pool head?

Now attach with the connected hose end near the vacuum plate. Now position the garden hose end in the pool water and also grip the vacuum pool head on the pool water surface. Once you immerse the vacuum head in the pool water, it will fill up the entire system. Now you should switch on the pump circulation system.

How do you connect a vacuum to a pool skimmer?

To run the vacuum system, you need to connect the hose into the circulation pump. Put the vac plate into the skimmer and leave the basket in place. Remove the skimmer cover and attach the hose directly to the vac plate.

How do you vacuum an above ground pool with a hose?

Simple Steps to Vacuuming Your Above Ground Pool. Attach vacuum hose and pole to vacuum head. Submerge unit in pool. Hold other end of hose over water return. Hose will fill with water, driving out all air trapped in hose. While holding hose below water, place the vacuum plate into the skimmer, leaving the leaf basket in place.

How to get started with a pool vacuum?

Getting Started 1 Assemble your pool vacuum. This is quick and easy to do. ... 2 Connect the vacuum hose. Attach one end of the hose to the vacuum head and attach the other end to your skimmer using the vacuum plate. 3 Choose your filter valve setting. ... 4 Start vacuuming. ... 5 Disconnect, change filter settings, and do a final cleanup. ...

How do you vacuum a pool with a telescoping pole?

Step 1: Assemble your pool vacuum. This is quick and easy to do. Simply attach the vacuum head to your telescoping pole (remember, it should snap on easily). Step 2: Connect the vacuum hose. Attach one end of the hose to the vacuum head and attach the other end to your skimmer using the vacuum plate.

Why should you Vacuum your above ground swimming pool?

As you may have known, vacuuming helps to remove the debris in your swimming pool mainly that sticks on its wall and floor. Vacuuming your above ground swimming pool is one of the steps that you have to add to your regular maintenance list. In fact, vacuuming is a must-do action when you face some problems like cloudy water and algae invasion.

How do you attach a vacuum head to a pool skimmer?

Now, you’ll need to attach the vacuum head to your skimmer by: Locating the skimmer at the side of your pool. Removing the skimmer lid and strainer basket. Threading your hose carefully through the skimmer inlet while keeping the open end of the hose submerged at all times.

What is a pool skimmer and how does it work?

Some pools have a floating skimmer and these are directly connected to the pool vacuum. These pool vacuums float around the pool to collect all the dirt randomly from the pool surface. It is best to use these skimmers for pools that are above ground.

How to use a pool vacuum to clean the pool?

Put The Vacuum In The Pool Now that the vacuum is set up, place the vacuum head inside the pool. Also, put the hose in the pool so that it fills up with water. 5. Connect The Skimmer From there, you need to connect the other end of the hose to the skimmer.

How do I clean the skimmer on my Pool?

Locate the skimmer on your pool on one of its sides. Remove the lid of the skimmer and the skimmer basket (pump strainer basket). You have to thread the house now and do it carefully right through that skimmer inlet. Keep that open end of the vacuum hose submerged all the time.

Related posts: